Repair guide : LCD Shield Plate iPhone 5C

Level : Easy Time : 25 min Author : Louis O.
175 people have done this repair successfully ! Why not you?
Located behind the LCD, this metal plate protects the LCD screen of your iPhone 5C. It is disassembled when replacing the screen.
Some advice before you start
Guide format : Pdf Integrate

Step 1

Before replacing the LCD shield plate of your iPhone 5C, you have to securely turn it off..

Remove the two pentalobe screws on each side of the lightning connector.

Step 2

To open your iPhone 5C, put the iSclack or a suction cup on the front panel.

With the iSclack : Put the iPhone in between the plastic suction cups. Close the handle, it will pull the front panel up from the rear.

With a suction cup : Put a suction cup above the home button. Then gently pull to lift the front panel of the iPhone 5C.

Make sure the suction cup is completely on the screen.

Step 3

You can now open the display assembly vertically.

Do not remove completely the front panel, it is still attached to the logic board by a few cables.

Step 4

Remove the 4 screws circled in red holding the cables to the logic board.

Step 5

With a pair of tweezers, remove the panel assembly cable bracket from your iPhone 5C.

Step 6

With a nylon spudger, disconnect the 3 connectors on the screen :

the first one is the cable to the front camera and the proximity sensor,

the second one is the touch screen cable,

Step 7

The third one, is the LCD Retina cable.

Step 8

You iPhone 5C's display assembly is now disassembled.

Step 9

Remove the two screws circled in red holding the LCD shield on the right.

Step 10

Remove the two screws circled in red holding the LCD shield on the left.

Step 11

Remove the screw circled in red holding the LCD shield at the bottom.

Step 12

Remove the three screws circled in red holding the LCD shield at the top as well ad the earpiece speaker bracket.

Step 13

Insert the nylon spudger, between the bracket and the cable to free it .

Step 14

Still with the nylon spudger, lift the earpiece speaker and remove it from its compartment.

Step 15

Still using the nylon spudger, peel off the camera cable before removing it from its compartment.

Step 16

With your fingers, lift the LCD shield plate.

Step 17

With a nylon spudger, peel off the cable sticked to the LCD shield plate.

Step 18

The LCD shield plate is now disassembled, you can replace it by a new one.

To reassemble your iPhone 5C follow this guide in reverse order.

Comments

Add a comment

They're talking about us

SOSav in the press

  • SOSav on tf1
  • SOSav on france 2
  • SOSav on france 3
  • SOSav on m6
  • SOSav on france info
  • SOSav on 01 net
  • SOSav on l express